Product information

If you frequently switch between 35 / 40 ... MHz and 2.4 GHz with the same transmitter, or wish to use an earlier transmitter on the 2.4 GHz band, then the HFMx M-LINK external
module is the right solution for you.
The module simply plugs into the transmitter’s Trainer socket, and can either be fixed to the transmitter itself or installed in a transmitter tray. No modifications of any kind are required to the transmitter, and the conversion takes just a few moments to complete. The change-over switch on the HFMx M-LINK module provides a convenient means of switching between the different frequency bands - e.g. 35 MHz and 2.4 GHz - at any time.

The plus-points:
• Fast, simple, change-over from 35, 40 ... MHz to 2.4 GHz operation using the switch mounted directly on the HFMx module
• Change-over switch for selecting normal or restricted frequency band (“France mode”)
• Change-over switch for selecting 14 ms (Fast Response) or 21 ms servo frame rate
• Activating button on the module itself for selecting binding mode and range check mode
• LED status indicator

Content:
2,4 GHz RF-module HFMx M-LINK # 45612
Receiver RX-9-DR M-LINK # 5 5812.

 

Specification RF module # 45612
Frequency range 2.4000 GHz … 2.4835 GHz
Limited frequency range 2.4000 GHz … 2.4540 GHz
Transmission type 2.4 GHz FHSS M-LINK System
MULTIPLEX-LINK Frequency Hopping Spread Spectrum
Transmitter output 100 mW EIRP
Current drain approx. 50 mA
Temperature range -15°C … +55°C
Dimensions (L x W x H) approx. 83 x 52 x 11 mm (case)
Weight approx. 65 g

 

Specification receiver # 55812
Servo channel count 9
Reception system 2.4 GHz FHSS
(Frequency Hopping Spread Spectrum)
Operating voltage 3.5 V … 9.0 V
Power supply 4 - 5 NiXX cells, 2S LiPo / LiIo
Permissible operating temperature range - 20°C … + 55°C
Dimensions (L x W x H) approx. 55 x 35 x 11,5 mm
Weight approx. 25 g